One can choose a shrink-wrapping machine fro many reasons. First, the saving of wrapping material is among tha main reasons: in fact, compared to the use of cardboard, a 50% cost reduction is possible. Then, there are the advantages of higher protection of products stored in wet enviroments, redeced size of the package and easier detection of packed products.Thanks to the organisations fro segregated collection, the material used in for the packaging are completely reclaimed and re-used for different purposes.
Why a Bentec machine?
The long EXPERIENCE in the packaging sector GUARANTEES VERSATILY, QUALITY of components, RELIABILITY of operation, SAVING of material consumption and, especially, power saving thanks to the double-insuladed chamber inside the tunnel resulting in a 1/3 cost reduction. With our know-how, we design special solutions in compliance with the customer's needs..
Our machines use polyolefin-based polypropylene and polyethylene, the choice between the two films depending on the product to be packed. Polypropylene, more clear and trasparent, is normally used to wrap single product directly to the final user, therefore needing a better look and perfect closing. Polyethylene, more dull but more resistant, is normally used to wrap packages of product destined to distribution.The film gauge varies according needs, since a thicker film ensures a higher resistance and compactness of the package.
Min. 30 Max. 100
Min. 15 Max. 50
60% Long 40% Trasv
60% Long 60% Trasv
>Definition of the machine model
How to choose the most suitable machine
We manifacture many machine models, and each model can have different versions:
CB 50 X 60
CB 60 X 80
CB 80 X 100
The wording CB 60, 70, 80, corresponds to the sealer length, that is the CB 60 seal bar is 60 cm in length, and so on. To choose the most suitable machine according to your needs, it is necessary to take into account the following: